Everlast Wooden Beam Heavy Bag Hanger
The products I have bought from Dick's sporting goods have all turned out good and not too expensive plus they have a lot more to chose from.
April 2, 2013
A SIMPLE EASY WAY TO HANG YOUR HEAVY BAG. I HAD KNOW PROBLEMS.
March 5, 2013
While the bag hanger itself seems to be heavy duty, the bolts that came with it leave something to be desired. During the installation of this product, one of the bolts snapped off, leaving us not able to complete the installation yet. If you purchase this product, be careful to drill deep enough holes and don't over-tork the bolts. I recommend this product only with that warning.
February 26, 2013
This hanger did exactly as designed. I predrilled small pilot holes in the beam before i installed the included mounting screws.Works great!!
July 2, 2012
I screwed this into my garage into just a normal ceiling stud. I was a little nervous about it at first, but after may sessions its still hangin pretty good. No signs of fatigue as of today.
June 6, 2012
I purchased a heavy weight punching bag and needed a way to mount it under my wooden deck. This simple device did the trick. It works
May 28, 2012
It's decent, could use some work.
I have this in my garage on a 2x4 mounted to one of my ceiling joists. The bottom bolt where the bag hangs from could use spacers to keep it from sliding back and forth on and off the threaded part of the bolt. I suggest also picking up heavy duty springs to compliment this to keep the vibrations down when you workout on the bag. My whole garage shakes violently when I do... P.S. using it to mount a 100lb everlast c3 foam heavy bag. AWESOME heavy bag...
May 16, 2012
NOT GOOD FOR 80LBS OR MORE BAGS!!!!
I HAVE 80 OR 90 LB BAG, SNAPPED 1 WOOD SCREW AND BENT THE OTHER IN 10MIN!THIS BRACKET IS GOOD FOR LIGHT BAGS 50LBS OR SO,OR YOUR LITTLE SISTER IS HITTING IT!!!!!
September 4, 2011
No issues, works wonderfully!
June 11, 2011
Great support for heavy weight bag.
This is being used for a home gym for heavy weight bag. It was easy to install.[...] Thank you.
May 13, 2011