CenterPoint Laser Bore Sighter


You May Also Like:

CenterPoint Laser Bore Sighter - Dick's Sporting Goods
  • Show Enhanced
  • Free Shipping on Orders $25 or More!

Usually ships in 1 - 3 business days.

Standard Ground Service Available (normally $5.99)

Product Information:

Sight-in your scopes and open sights with the Centerpoint™ Laser Boresighter. This all-in-one boresighter uses a quick and easy scope/sight alignment tool that shows you exactly where your shot should land. The laser is rated at 100 yards of visibility at night and 25 yards in daylight. This Centerpoint™ boresighter fits .17 caliber to .50 caliber guns, plus 12, 16 and 20 gauge firearms, and it works on rifles and pistols.

  • All-in-one laser boresighter
  • Quick and easy scope and sight alignment tool
  • Rated at 100 yards of visibility at night and 25 yards in daylight
  • Fits .17 caliber to .50 caliber, plus 12, 16 and 20 gauge
  • Works on rifles and pistols (with minimum 3.8" barrel)
  • Model: CPLBS1745
  • Centerpoint

Click here for additional information relating to the Manufacturer's Warranty.
Country of Origin: China
Web ID: 19288246

Customer Reviews:

Rated 3.5 out of 5 by 13 reviewers.
Rated 3 out of 5 by Good but.... I don't think I really need to sight in an air rifle, would have preferred another size that would have been more useful. Otherwise, a good combo kit. January 14, 2017
Rated 4 out of 5 by Well worth it!!!! I truly believe in reviews on products, but this time I purchased this product before I read any as it was 50% off at the time so I grabbed it. After getting home I began to read reviews about this on other sites as well and found lots of poor and negative reviews. I decided to give it a try anyway. I have used it 6 times to sight in a smooth barrel shotgun, rifled barrel shotgun, and even my turkey gun with reflex sight, all at yards of 35 to 75 yards. without problems.It gets me on paper 8"x10" sheet first shot every time, no not a bullseye but on paper. There are lots of negative comments about it being inches off at xx yards , well it got you on paper didn't it? Its your job to fine tune your scope from there. The majority of the problems with it out there are really operator error or inexperience, Its simple don't over tighten, over work or abuse it and it will do its job and save you money on ammo. Good shooting, hope this helps September 28, 2016
Rated 5 out of 5 by This item was a gift to a friend. All I can say is that he said he was happy wirh it and it worked well March 4, 2016
Rated 4 out of 5 by easy to attach and set This was exactly what I wanted and I would recommend it to all my friends. January 16, 2016
Rated 4 out of 5 by Boresighter The boresigjter was very easy to use and worked great. The only complaint I would have is the on off switch is not very well designed. March 4, 2015
Rated 4 out of 5 by Good boresighter the product is just as described. I like it and it is simple to use. The day I received the boresighter I sighted three rifles. Shipping was very slow (around Christmas). January 2, 2015
Rated 4 out of 5 by Nice & simple Works perfectly: Downside - engineering on the "on/off mode could be improved, as well as loading of the batteries December 17, 2014
Rated 1 out of 5 by awful Soo I bought this to sight in a few different rifles put the first in a vice to sight . Sighted the scope took it out put it back in to double check the scope and it was off the spot by two inches. Sighted it again and retested it and off again. Thought it might be just the scope , got my old ruger thats a tac driver already zeroed in. Put this in and was off by more then an inch. I returned this garbage the next day December 3, 2014
Rated 4 out of 5 by Bore sighter needs more about how a rifle is sighted in and how to do individual firarms. The bore sighter is better than the instructions allow. For example, an open sight shotgun or muzzle loader might have a 25 yard bore sight match but a high ring mount scope with perhaps a 7mm magnum rifle will probably take more like 3/4 to one inch above the laser beam at 25 yards. The distance will depend upon the rifle and the type of sights. The bore sighter is an ok product and works pretty well. I would give it about 4 stars after bore sighting two rifles and a shotgun. November 28, 2013
Rated 4 out of 5 by works well for me I mounted a new Nikon Prostaff scope on my 270 went to the range and sighted it with this laser boresighter at 25 yds. the only problem I had was that it was a bright sunshiney day and the laser was difficult to see at 25 yds, but we figured out how to compensate for the sunshine and were able to boresight my rifle. 1st shot at 25yds was center 2 and 1 inch high. Moved to 50 yds and shot was still 1 inch high. moved to 100 and the shot was 3 inches high. made the adjustment to the scope and was punching bulls at 100 yds from the 4th shot on. very satisfied with the boresighter and my results. the reason I gave it a 4 was the minor problem we had seeing the laser in the light conditions we had. October 24, 2013
  • 2017-01-22 T05:56:34.390-06:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_13, tr_13
  • loc_en_US, sid_19288246, prod, sort_default
2 next>>