Wheeler Level Level Level

$24.99

You May Also Like:

Wheeler Level Level Level - Dick's Sporting Goods
  • Show Enhanced
  • Free Shipping No Minimum Purchase!
Check Store Availability
Guaranteed to Get There

Usually ships in 1 - 2 business days.

Standard Ground Service Available (normally $5.99)

Product Information:

Simply the most accurate scope leveling system available, the Wheeler ® Level Level Level eliminates pesky misaligned crosshairs that may prevent you from accurate shooting. This Wheeler ® Level Level not only enhances shooting accuracy but only takes minutes to accurately level your scope! It works with virtually any bolt-action rifle and is adaptable to many other firearm designs.
FEATURES:

  • Accurately levels scopes
  • Leveling takes only minutes
  • Works with most bolt-action rifles
  • Model: 113-088
  • Wheeler Engineering
Country of Origin: China
Web ID: 4320664

Customer Reviews:

Rated 4.1 out of 5 by 24 reviewers.
Rated 4 out of 5 by Outstanding product It is very good in order to level your scope on the rifle. August 23, 2016
Rated 2 out of 5 by beware To be fair I was in a hurry going to range to try out a new ar build and vortex crossfire 2 scoop. No time for on line order so ran in and this looked like just what I wanted. Beware of returned damaged product. In settin up I noticed the ppackage had been opened and taped shut. Both levels ther but the one with the magnet on the recever was so weak it would not hold flat. The weight of the bouble level was more than the magnet could hold. Inspect what you expect. Used a bore sight to 0 in backup sights. Then set ilumnated 1:4 scoop to match. January 22, 2016
Rated 3 out of 5 by Wheeler level system I could not use the chamber leveler as instructed. However, I used a flat piece of steel across the Weaver mounting brackets in conjunction with the chamber level to get the rifle in the correct upright position. Then, I was able to get the scope aligned in the best position. A trip to the range verified good scope setup....... October 20, 2015
Rated 4 out of 5 by Worked for me Worked out well, but using a low ring mount i couldn't keep both levels in place simultaneously like in the picture. That said, it was still effective. July 25, 2015
Rated 5 out of 5 by Great Product - Time Saver This is a great product. It is about time someone created this product. This has expedited all of my scope mounts. This is something all firearm specialist should use. March 20, 2015
Rated 4 out of 5 by simple but you may need to get creative. I've recently purchased two new vortex scopes to install on two new sako rifles. In the past I've just mounted my scopes on my guns and used a six inch plumber's level to get the job done. I knew I was close but not dead on. So I bought the wheeler level level and now I know I'm dead on. Simple to use and I like the fact that you can watch the levels as you tighten down the scope rings and make any adjustments on the set screws as you go along to keep both bubbles in alignment with each other. Bottom line it works, it's much faster and no guess work. February 5, 2015
Rated 2 out of 5 by will not set flat in all gun models I own a Savage 110 in .270 Winchester. The level will not sit flat in the receiver because the stock sits above the receiver. Also the magnets that hold the level in place aren't very strong. May work on some gun models but not mine. November 11, 2014
Rated 3 out of 5 by Not sure about this one The level that fits the receiver seemed to move around too much. I tried to use it on my daughters 10/22. It just seemed like a sloppy fit. August 26, 2014
Rated 5 out of 5 by do it right thi tool is a must have for anybody installing a scope on a rifle August 12, 2014
Rated 5 out of 5 by Great I bought this kit to mount my optic on my 17 hmr and worked perfectly well worth the money deff recommend May 14, 2014
  • 2016-11-01 T01:12:09.581-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_24, tr_24
  • loc_en_US, sid_4320664, prod, sort_default
2 3 next>>