Rated 5 out of 5 by jarcher Great jig
This jig is really great! Allows me to fletch each shaft consistently, every time. There are measurement marks on the clamp that help you ensure you're gluing your vanes in the location you want them to be, and it comes with interchangeable modules that allow for either 3 or 4 vane arrow fletching. The only negative thing I would say is that it only does one vane at a time, so depending on how many shafts you're doing, the project may be a bit time consuming. Fantastic buy for the price, because it gets the job done and done well!
June 21, 2013
Rated 4 out of 5 by Nitecryvl Perfect Tool for the Job
Easy to use. Great results. Good value. I am looking forward to using it for years to come.
June 12, 2013
Rated 4 out of 5 by billy fletching jig.
Simple to use, well made. Multiple applications for different users.
March 26, 2013
Rated 4 out of 5 by robetobe works great
Works great does the job. Im new to archery. Fairly in expensive
March 25, 2013
Rated 2 out of 5 by tony 92 works but hard to use
i hought this to refletch my own arrows and have played with this thing for hours. i cant get the fletchings to align even after aligning the lines exactly. flethes 1 and 2 are good 3 is really off. i had to remove the nothces in the knob and just used a marker and a good arrow and marked where the vanes needed to be and it works great like that.
March 22, 2013
Rated 4 out of 5 by billyd good and quick
having problem jighead not working well with crossbow bolts
January 27, 2013
Rated 5 out of 5 by Seafish Easy to use
Was able to restore a dozen pre 'prepped arrow shafts in about 2 hours using the g-5 blu glu adhesive, arrows were ready to use the next day.
November 29, 2012
Rated 5 out of 5 by Gronks Works Well
Have fletched dozens of arrows with this product , takes a little time but is easy and customizing your own arrows is cool .
October 19, 2012
Rated 1 out of 5 by g2 vanes off location
The first time I used it to replace the odd vane (index fletch) I saw it was glued off location.Looking at it from the end I could see the slot that holds the nock wasn't parallel with the magnet that holds the vane jig to keep them properly aligned.the only way to fix it would be to redrill the two holes the plastic pins slide into about 155 thousandths counterclockwise.I was using a three vane jig. If you replace all three vanes at one time they are spaced properly but you have to turn the nock with a pliers to align it properly.I contacted the company and they were very nice and sent me a different type of jig and said they would have their tool and die people check it.Hopefully they corrected it,then it would work fine and I would recommend it.
July 8, 2012
Rated 4 out of 5 by DDub Good less expensive jig
With the right glue that is super, this jig is quick and easy to use. The quality lacks a little, has a cheap feel. Still a good jig for the money though. I would recommend using a marker to mark the clamp where your vane sits so you have a benchmark to place your vane, and not have to look at the measuring lines on the side every time you put a vane in it.
April 9, 2012