Contains XX oz bottle with lubricant applicatior for easy use
Made with odorless, non-toxic 100% Silicon
To use, apply 1 oz of lubricant after every 20 hours of treadmill use
INSTRUCTIONS:
1. Power down and unplug the power cord for the treadmill.
2. Remove the lubricating foam rod, and the lubricant bottle.
3. Apply a small amount of silicon lubricant on both sides of the foam rod (0.5 oz on each side of the foam rod). Be sure to apply enough to cover the foam rod that will make contact with the running belt.
4. Slightly lift one side of the running belt and slide the foam rod under the running belt.
5. Slide the foam rod the entire length of the running belt from front to back. Ensure that the foam on the foam rod contacts both the running deck and the running belt.
6. Remove the foam rod from the treadmill.
7. Plug in the power cord and power on the treadmill.
8. Start up the treadmill on the lowest speed and allow the treadmill to run for 1 minute. This will allow the lubricant to be spread throughout the running deck.
9. When complete, store the foam road in the provided plastic sleeve and store away in a cool, shaded area until next use. It is recommended to clean the foam rod with dish detergent after every few uses.
The easy-to-use kit made the treadmill belt quieter and flow smoother.
Read More
Gray Fitness
9 months ago
Cleaning Made Easy
This is the best and easiest way to clean your treadmill
Read More
archey
1 year ago
Kit And Oil For My Treadmill.
I bought the kit because it was highly recommended by a worker at Dicks. I was going to buy the oil by itself. He recommended the kit. I am glad I did it worked great.
Read More
Lioness7
1 year ago
Fitness Gear Kit
This Kit is perfect for my treadmill. I do maintenance every six months. It is very easy to use.
Read More
KECar
1 year ago
Easy To Use
Kit is easy to use and works better than trying to spray the belt with a can lube. Highly recommend!
