Show off your trophies with Hunters Specialties® Deer Antler Mounting Kit. This mounting kit is easy to assemble and presents a nice clean job. Deer Antler Mounting Kit features a wood plaque, one red cap, one crème cap and mounting hardware.
- Easy to assemble
- Wood plaque
- Red cap
- Crème cap
- Mounting hardware
- Brand : Hunter's Specialties
- Country of Origin : Imported
- Style : 00639
- DICK'S Pro Tips
- Web ID: 15HSPUDRNTLRMNTNGHBG
- SKU: 12983943
Hunters Specialties Deer Antler Mounting Kit is rated out of 5 by 21.
Rated 4 out of 5 by Dean from This antler mounting kit was good except for the red/white cover in the middle of the antlers . This product needs to be more universal in that I wasn't able to use the cover (red/white) at all. I mounted an eight point antler set but the center of the horns were way to large for these covers. I was able to use the strap only half way across the antlers. I used a headless screw straight into the center of the antlers, which helped hold the antlers up on the board. Please figure a way to make a mount for much larger antlers. Price was not what I wanted to pay but I did as Dick's was the only store that had kit in stock. Thank you for asking a feed back on your products. K.D. Willeford
Date published: 2016-01-12
Rated 2 out of 5 by PC from ehhhh Wasn't awful but it needed some work. They left pieces out so I had to find my own screws. The velcro that came with it doesnt stick so I had to use tape. Also the predrilled holes didn't line up with the 8 pointer I had so I had to bend it all out of whack to get it to fit. Also had to cut a lot out of the cap to make it work. Wasn't the greatest buy but it's not awful if you don't mind putting a lot of extra work into it. I would definitely recommend spending a few more bucks for something else. The back plate does look really nice though once I finally got it mounted.
Date published: 2011-11-05
Rated 5 out of 5 by ATV_5 from Suited my needs I purchased two of these mounting kits. Yes, these are not the best of quality, however, they suited my needs and the price was great. I at least now have the antlers on the wall and not laying about the garage. I had a difficult time getting the covers to fit over the skull plate. So, in the interim there is no cover. I drilled holes in the skull plate and mounted the antlers to the board. I kind of like it without the cover. I will eventually visit a trophy shop and attach a small brass plate to each mount. Overall, nice product and it works just fine.
Date published: 2019-02-05
Rated 5 out of 5 by Michael Sr from Whitetail hunt It looks great on my wall. Of course the antlers have some thing to do with it,a4x3
Date published: 2018-01-23
Rated 2 out of 5 by smack from decent Just pressing board with laminate surface. It's alright, but expensive.
Date published: 2012-12-01
Rated 1 out of 5 by Ebeldean from do not purchase I've mounted antlers before and it's always been very easy. This kit is the cheapest I have ever seen. The two supplied covers do not even come close to fitting. Save your money and find another brand. Obviously whoever is in charge of Dick's purchasing never examined this kit or they wouldn't have put it on their shelves. Very dissapointed.
Date published: 2019-01-01
Rated 3 out of 5 by Rrandy from Attractive plaque but low quality skull caps I bought this for my son’s first deer. The plaque and hardware to attach the antlers worked well, but the skull caps are very thin plastic. We decided to wet form a leather skull cap instead. A note of caution - the nails supplied to affix the hanger to the back are too long, and will penetrate the front of the plaque.
Date published: 2019-11-19
Rated 5 out of 5 by sfcmtrn from easy to use Once I got the skull plate cut at desired angle and strapped on plaque it was easy. First cut out the cover you don't want and use it as a template to make a perfect cut on the one you do want. I then went to an engraver and had a small brass plate made with my sons name and date of kill of his first buck.
Date published: 2019-01-18
We're testing out a new product page experience, and we'd love your feedback.SHARE YOUR THOUGHTS